Removing the front fabric lining

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Front Fabric Lining Components - Targa

Courtesy of PORSCHE OF NORTH AMERICA, INC.

FRONT FABRIC LINING COMPONENTS REMOVING PROCEDURE - TARGA

No.	Procedure	Instructions
1	Removing the cover	Pull cover -1-direction of arrow- . See Fig 1.
2	Removing top connection	Pull the connection seal, top -3-2-2-X- . See Fig 1.
3	Removing lower connection	1. Open sliding roof cover.
		2. Pull the fabric lining -3- in -direction of the arrow- out of the roof profile. See Fig 1.
4	Removing the plastic cover	1. Unscrew fastening screw -4- from the plastic cover -2- . See Fig 1.
		2. Move plastic cover out of the metal clip -X- in -direction of arrow- . See Fig 1.
		3. Guide the plastic cover out of the roof frame at the front -direction of arrow- and out of the roof module. See Fig 1.