Installing the microswitch for the sliding roof > closed <

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Microswitch For Sliding Roof (Closed) - Targa

Courtesy of PORSCHE OF NORTH AMERICA, INC.

MICROSWITCH INSTALLING PROCEDURE - TARGA

No.	Procedure	Instruction
1	Installing microswitch	Insert microswitch and position the fastening screw -3- . See Fig 1.
2	Connecting the plug connection	Push on the plug of the microswitch and press together until the plug -2-arrow- . See Fig 1.
3	Installing the closing aid holder	Fold the closing aid holder upwards in the -direction of the arrow-inset-1- . See Fig 1.
4	Installing rear wall lining	Position cover and push on in the -direction of the arrow- . See Fig 1.