Installing left electric motor for sliding roof
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Check the shafts at the drive pipe bracket for chips.
LEFT ELECTRIC MOTOR INSTALLING PROCEDURE - TARGA
| No. | Procedure | Instructions |
|---|---|---|
| 1 | Installing the electric motor | Push the motor -4-5- . See Fig 1. |
| 2 | Screwing the electric motor tight | Tighten the fastening screws -2- . See Fig 1. |
| 3 | Connecting the plug connection | Press the plug -5- . See Fig 1. |
| 4 | Installing the closing aid holder | Fold the closing aid holder upwards in the -direction of the arrow-R-1- . See Fig 1. |
| 5 | Installing rear wall lining | Position cover and push on in direction of arrow until the pegs of the cover clip in. |