LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Maintenance - 911 CARRERA (996)) >> Transmission maintenance: Changing transmission oil in final drive >> Changing transmission oil in final drive

Changing transmission oil in final drive

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Use only oils approved by Porsche. See Parts Catalogue!

Filling capacity: 0.9 liter 

NOTE:
  • There is no oil drainage screw on the final drive.
  1. Unscrew the oil filler screw and remove oil by suction using a suitable hand pump while the transmission is warm from operation.
  2. Fill with transmission oil using filling system V.A.G 1924.
    NOTE:
    • Filling must be carried out very slowly because there is a baffle plate in the cover of the final drive.
  3. Screw in oil filler screw with new sealing ring.

Tightening torque: 30 Nm (22 ftlb.) 

scientia non olet · About LEMON Manuals