Safety instructions for air conditioning
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Danger of injury due to the filled air-conditioning / system bursting during welding and soldering work!
- In the case of extreme heating of filled air-conditioning systems, a very strong overpressure may be caused in the system which may lead to an explosion.
- No welding, soldering or hot-air heating may take place on parts of the filled air-conditioning system!
- While drying after painting work, the temperature burden on the vehicle must not exceed two hours at a maximum temperature of 80 °C!
- Make sure that parts of the air-conditioning system do not heat up during welding or soldering work on the vehicle!