Replacing control modules
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
The replacement of electronic control modules after an accident is necessary if at least one of the following conditions is met:
- The housing is noticeably deformed or damaged.
- The supporting surface or bracket is deformed (the unit shows no external damage).
- The plug connection is damaged or corroded by moisture.
- Functional checks on or self-diagnosis of the unit reveals the fault "Control module faulty".