Gap dimensions, body front
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
FRONT BODY GAP DIMENSIONS DESCRIPTIONS (UP TO MODEL YEAR 2001)
| Designation | Dimension | Note | |
|---|---|---|---|
| Front cover to front trim | -A- | 6+1 mm | Cover only lowered (max. 1 mm) |
| Front cover to modular headlight | -B- | 4.5 mm | Determine left to right body Even seam joining line to point C |
| Modular headlight to front trim | -C- | 4.5 mm | Even seam joining line to point B |
| Modular headlight to wing | -D- | 2-1.5 mm | |
| -E- | 4.5-0.5 mm | ||
| Wing to front trim | -F- | 3 +/-0.5 mm | Gap is evident |
| Front wing to outer side section | -G- | 4-05 mm | |
| -H- | 1.2 mm | ||
| Wing to front cover | -I- | 4 +/-0.5 mm | Determine gap left to right |
| Filler flap towing | -J- | 3.5 +/-1 mm | All the way round |