Gap dimensions, body rear
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
BODY REAR GAP DIMENSIONS DESCRIPTIONS (AS OF MODEL YEAR 2002)
| Designation | Dimension | Note | |
|---|---|---|---|
| Rear trim to outer side section | -A- | 3 +/-0.5 mm | Gap is evident |
| Tail light to outer side section | -B- | 3 +/-0.5 mm | |
| -C - | 1.4 +/-1 mm | Tail light only lowered | |
| Tail light to middle side section | -D- | 3 +/-0.5 mm | |
| -E- | 2 +/-1 mm | Tail light only lowered | |
| Rear trim to tail light | -F- | 5 +/-1 mm | |
| Rear lid to side part | -G- | 4.5 +/-1 mm | Determine gap left to right |
| Rear lid to rear spoiler | -H- | 5 +/-1 mm | Rear lid only lowered |
| Rear lid to spoiler top section | -I- | 4.5 +/-1 mm | Rear lid only lowered (max. 1 mm) |
| Rear centre panel to spoiler top section | -J- | 6+/-1 mm | Rear lid only lowered (max. 1 mm) |
| Rear lid to spoiler top section | -K- | 4.5 +/-1 mm | Rear lid only lowered (max. 1 mm), determine seam |
| Rear window to outer roof panel | -L- | 8.5-2 mm | |
| -M- | 4.5 mm | Only lowered | |
| Rear window to outer side section | -N- | 1 mm | |
| -O- | 7 mm | Determine left to right | |
| Outer side part to rear centre part | -P- | 4.3 +/-1 mm | |
| -Q- | 1.2 mm | Adhesive seam | |
| Rear centre part to rear lid | -R- | 5.2 +/-1 | Only lowered |