Gap dimensions, body front
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
BODY FRONT GAP DIMENSIONS DESCRIPTIONS (AS OF MODEL YEAR 2002)
| Designation | Dimension | Note | |
|---|---|---|---|
| Front cover to front trim | -A- | 4+2 mm | Cover only lowered (max. 1 mm) |
| Front cover to modular headlight | -B- | 4.5 mm | Determine gap left to right |
| Modular headlight to front trim | -C- | 4.0 mm | |
| Wing to front trim | -D- | 3 +/-0.5 mm | Gap is evident |
| Modular headlight to wing | -E- | 3.5 +/-0.8 mm | |
| -F- | 2-1.5 mm | ||
| Front wing to outer side section | -G- | 3.2-0.5 to mm 3-0.5 | Even transition from front to rear |
| -H- | 1.4 +/-1 mm | ||
| Wing to front cover | -I- | 4 +/-1 mm | Determine gap left to right |
| Filler flap to wing | -M- | 3.5 +/-1 mm | All the way round |