Gap dimensions, body centre
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
BODY CENTRE GAP DIMENSIONS DESCRIPTIONS (AS OF MODEL YEAR 2002)
| Designation | Dimension | Note | |
|---|---|---|---|
| Door to front wing | -A- | 4+2.5 mm | Door only lowered (max.1 mm) |
| Door to outer side section | -B- | 4.4-0.5 mm | |
| -C- | 1.6 +/-1 mm | Door only lowered | |
| -E- | 4-0.5 mm | Door only raised | |
| Outer door panel to door window | -F- | 7 +/-1.5 mm | |
| Door window to rear side window | -G- | 7 +/-1 mm | Door window lowered, max. 1 mm |
| Roof rail to sealing | -H- | 3.5 +/-1.5 mm | |
| Sliding roof panel to outer roof panel | -I- | 5.5 +/-0.5 mm | All the way around only lowered at front only raised at rear |
| Roof joint strip to outer roof panel | -J- | 3.2 +/-1 mm | |
| Windscreen to outer roof panel | -K- | 8.5+/-0,-2 mm | |
| -L- | Only lowered | ||
| Roof joint strip | -M- | Roof joint strip tapers off until it is flush | |
| Cowl panel frame to windscreen | -O- | 8.5-1 | |
| -N- | I | Only lowered | |
| Cowl panel frame to wing | -P- | 3.5 to mm 7.0 +/-1 | Continuous transition |