Gap dimensions, body rear
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
REAR BODY GAP DIMENSIONS DESCRIPTIONS - TARGA
| Designation | Dimension | Note | |
|---|---|---|---|
| Cover at side of rear window to rear centre panel | -G- | 11.4+/-1 mm | Determine gap left to right |
| Cover panel of rear window to rear centre panel | -H- | 5+1 mm | |
| Side part to rear centre panel | -J- | 4.3 +/-1 mm | |
| -I- | 1.2 | Adhesive seam | |
| Side part to rear window lid | -K- | 5+/-1 mm | |
| C-pillar cover to roof rail | -L- | 0.5+1 mm | |
| C-pillar cover to side part | -M- | 2.5-1 mm | Determine gap left to right |