Diagram - Centre gap dimensions, Cabriolet
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CENTRE GAP DIMENSIONS DESCRIPTIONS (CABRIOLET)
| Designation | Dimension | Note | |
|---|---|---|---|
| Cowl panel frame to wing | -A- | 3.5 to 7.0 +/-1 mm | Continuous transition |
| Windscreen to cowl panel frame | -B- | 8.5-1 mm | |
| Door window to rear window | -C- | 9 +/-1 mm | |
| Rear side section flap to side trim panel | -D- | +2.5 mm | |
| -E- | 4+2 mm | ||
| Rear side section flap to frame trim panel for roll-over protection system | -F- | +2 mm | |
| Cowl panel frame to roof frame 1 | -G- | 7 +/-1 mm | Roof frame only lowered |