LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Body, General Information - 911 CARRERA (996)) >> Body parts of high-strength steel >> Welding work

Welding work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The use of the oxyacetylene welding process is not permissible for body parts made of high-strength steel!
  • Test welding must be carried out in the case of resistance spot welding (RP) of different panel strengths!

The body parts made from high-strength steel can be welded using the RP resistance spot-welding or MIG welding processes that are customary in workshops.

scientia non olet · About LEMON Manuals