LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Steering - 911 CARRERA (996)) >> Removing and installing steering wheel (airbag) >> Installation

Removing and installing steering wheel (airbag): Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Refit the steering wheel with the wheels in the straight-ahead position or in accordance with the marking so that the upper spokes of the steering wheel are horizontal. Caution: Do not trap the cable of the contact unit.
  2. Fit hexagon nut with spring washer and tighten to 46 N.m (34 ftlb).
  3. Install driver's airbag unit. Use new fastening screws. Tightening torque: Tightening torque 10 N.m (7.5 ftlb.)
  4. Check horn for operation.
scientia non olet · About LEMON Manuals