Tightening torques
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TORQUES SPECIFICATIONS - SEALING RING FOR SHORT FLANGED SHAFT (AS OF MY 2002)
| Location | Thread | Tightening torque Nm (ftlb.) |
|---|---|---|
| Wheel to wheel hub | M14 x 1.5 | 130 (96 ftlb.) |
| Drive shaft to transmission | M10 | 81 (60 ftlb.) |
| Stabilizer to carrier side section | M8 | 23 (17 ftlb.) |
| Stabilizer to stabilizer mount | M10 | 46 (34 ftlb.) |
| Control arm to carrier side section | M12 x 1.5 | 110 (81.5 ftlb.) |
| Short flanged shaft to transmission | M10 | 46 (34 ftlb.) |