LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Differential, Transaxle System - 911 CARRERA (996)) >> Removing and installing long flanged shaft (as of MY 2002) >> Tightening torques

Tightening torques

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TORQUES SPECIFICATIONS - LONG FLANGED SHAFT

Location Thread Tightening torque Nm (ftlb.)
Mounting saddle for flanged shaft to transmission M8 23 (17 ftlb.)
Drive shaft on flanged shaft M10 81 (60 ftlb.)
Wheel to wheel hub M14 x 1.5 130 (96 ftlb.)
Holder to mounting saddle M6 10 (7.5 ftlb.)
scientia non olet · About LEMON Manuals