Tightening torques:
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS - FRONT FINAL DRIVE
| Component | Tightening Torques |
|---|---|
| Studs to front-axle cross member (M8) | 20 Nm (15 ftlb.) |
| Front transmission support to transmission (M10) | 65 Nm (48 ftlb.) |
| Front transmission support to front-axle cross member (M10) | 65 Nm (48 ftlb.) |
| Rear transmission support to body (M10) | 65 Nm (48 ftlb.) |
| Rear transmission support to transmission mount (M10 x 90) | 65 Nm (48 ftlb.) |
| Drive shafts to front-axle final drive (M8) | 39 Nm (29 ftlb.) |
| Diagonal braces to body and front-axle cross member (M12) | 100 Nm (74 ftlb.) |
| Tank strap to body (M8 x 40) | 23 Nm (17 ftlb.) |
| Pipe holder to transmission support (M6) | 7 Nm (5 ftlb.) |