Tightening torques:
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS - DIFFERENTIAL
| Component | Tightening Torque |
|---|---|
| Diagonal braces to body (M10) | 65 Nm (48 ftlb.) |
| Diagonal braces to cross member (M12) | 100 Nm (74 ftlb.) |
| Diagonal braces carrier side member (nut) | 23 Nm (17 ftlb.) |
| Short flanged shaft to transmission (M8) | 25 Nm (18 ftlb.) |
| Cover for final drive to transmission (M8) | 23 Nm (17 ftlb.) |
| Drive shaft to transmission flange (M10) | 81 (60 ftlb.) |
| Wheel to wheel hub | 130 Nm (96 ftlb.) |
| Connecting rod to spring strut | 46 Nm (34 ftlb.) |
| Rear axle carrier to carrier side member (M12) | 100 Nm (74 ftlb.) |