LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Differential, Transaxle System - 911 CARRERA (996)) >> Removing and installing cover for final drive >> Removal

Removing and installing cover for final drive: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove final drive (refer to Removing and installing front final drive  ).
  2. Drain oil.
  3. Press out flanged shaft with two mounting levers.
  4. Unscrew fastening screws for the lid and remove the lid by tapping it with a plastic hammer.
scientia non olet · About LEMON Manuals