LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Automatic Transmission, Controls, Case - 911 CARRERA (996)) >> Removing and installing shiftlock solenoid >> Installation

Removing and installing shiftlock solenoid: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit solenoid in correct position and properly route cable underneath the cable guides. Refer to Figure .
  2. Plug cable onto manual switch according to wiring diagram and fasten plug connection with holder on the selector support.
scientia non olet · About LEMON Manuals