LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Automatic Transmission, Controls, Case - 911 CARRERA (996)) >> Removing and installing selector knob >> Installation

Removing and installing selector knob: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the selector knob with spring clip, compression spring and locking button.
    NOTE: Fit conical compression spring with the small diameter facing the guide peg.
  2. Press the complete selector knob onto the shift lever until it bottoms.
  3. Check the function of the locking button.
scientia non olet · About LEMON Manuals