Tightening torques
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS - TRANSMISSION G96/00 AND G96/01
| Location | Thread | Tightening torque Nm (ftlb.) |
|---|---|---|
| Cross member to carrier side section | M 10 | 65 (48 ftlb.) |
| Stabilizer to rear-axle cross carrier side section | M 8 | 23 (17 ftlb.) |
| Drive shaft on the transmission flange | M 10 | 81 (60 ftlb.) |
| Clutch slave cylinder on transmission | M 8 | 23 (17 ftlb.) |
| Transmission support to body | M 10 | 65 (48 ftlb.) |
| Transmission support to body | M 10 | 65 (48 ftlb.) |
| Transmission prop to transmission support | M 10 | 65 (48 ftlb.) |