LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Clutch, Controls - 911 CARRERA (996)) >> Removing and installing clutch >> Assembly instructions >> Installation

Assembly instructions: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit centering mandrel (special tool 9102) with drive plate in the guide bearing (needle bush).
  2. Fit thrust plate. Always tighten pan-head screws in several stages and in diametrically opposite sequence. Tightening torque: 23 Nm (17 ft.lb.)
  3. Remove centering mandrel.
scientia non olet · About LEMON Manuals