LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Wiring - 911 CARRERA (996)) >> Repair of main wiring harness >> Removal

Repair of main wiring harness: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Take off cover of battery and radiator tank.
  2. Disconnect the battery and cover terminal or battery.
  3. Remove front wheel housing liner. Undo cable ties in the area of the wheel housing, and remove combination wire.
  4. Carefully remove insulating tape from the combination wire in the area of the disconnection point and cut the old combination wire before the exit to the wheel housing (do not damage any other wires).
scientia non olet · About LEMON Manuals