Removing current distributor
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CURRENT DISTRIBUTOR REMOVAL PROCEDURE
| No. | Procedure | Instructions |
|---|---|---|
| Disconnecting battery | Remove the battery cover and the cover of the right radiator tank. Refer to REMOVING AND INSTALLING COWL PANEL COVER . Refer to WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY . | |
| 1 | Fastening current distributor | Pull off the covering cap -1-2-3- . See Fig 1 . |
| 2 | Cover in passenger's footwell | Unscrew both plastic screws -4-5- . See Fig 1 . |
| 3 | Lowering the current distributor | Disconnect the tie-wrap -7-6-6-A-arrow- . See Fig 1 . |
| 4 | Opening the current distributor | Disengage the lock -arrow-8-green-red-blue- . See Fig 1 . |
| 5 | Disconnecting the connection lines | Mark the connection lines -C-C-B-9- . See Fig 1 . |