Installing optical contacts on connector side

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Remove the dust boot right before plugging.
Check the proper condition of the contact.

Insert the optical contact -B- in the connector until it engages audibly.

Fig 1: Installing Optical Contact On Connector Side
Courtesy of PORSCHE OF NORTH AMERICA, INC.
- -A- Optical contact, grey. See Fig 1 .
- -B- Optical contact, black. See Fig 1 .
Lock the secondary locking -arrow- and check the optical contacts for tightness.

Fig 2: Locking Secondary Locking
Courtesy of PORSCHE OF NORTH AMERICA, INC.