LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (74 - Seat UPHOLSTERIES, Cover -- CARRERA (997)) >> WM 742019 Removing And Installing Cover For Front Middle Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing Cover For Front Middle Backrest

Removing Cover For Front Middle Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Cover For Front Middle Backrest Position
G09830091Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Press cover for backrest -1-  carefully out of the backrest shell -2-  using a screwdriver -3-  .
    Fig 2: Loosening Cover
    G09830092Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Insert your hand into the top of the backrest cover -1-  and disengage it by pulling it up out of the backrest frame -2-  (-arrow A-  ). Then press cover for backrest together slightly in the middle -arrows B-  and pull forwards and out.
    Fig 3: Removing Cover For Backrest
    G09830093Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    Only for vehicles with heated seats.

    Information 

  3. Disconnect electric plug connection for backrest seat heating -1-  .
    Fig 4: Disconnecting Plug Connection
    G09830094Courtesy of PORSCHE CARS NORTH AMERICA, INC.