LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (74 - Seat UPHOLSTERIES, Cover -- CARRERA (997)) >> WM 741919 Removing And Installing Cover For Front Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing Cover For Front Backrest >> Notes

Removing Cover For Front Backrest: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Cover For Front Backrest Position
G09830007Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew fastening screw -2-  and remove coat hook -1-  .
    Fig 2: Removing Coat Hook
    G09830008Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Insert a plastic wedge between the backrest cover -1-  and the collar -2-  and unclip collar.
    Fig 3: Removing Collar
    G09830009Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Press out cover for backrest -1-  from the cushion carrier -2-  lower left and right using a screwdriver -3-  .
    Fig 4: Disengaging Cover For Backrest
    G09830010Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Press out cover piping -1-  right and left from backrest frame -2-  .
    Fig 5: Loosening Cover Piping
    G09830011Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Remove side airbag. → REMOVING SIDE AIRBAG
  6. Slightly loosen connection of backrest cover -1-  from frame for side airbag -2-  with a screwdriver -3-  and pull out all around by hand.
    Fig 6: Loosening Connection At Frame For Side Airbag
    G09830012Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  7. Press out cover for backrest -1-  from the cushion carrier -2-  lower left and right using a screwdriver -3- -Arrows A-  .
  8. Pull out cover for backrest -1-  all around by hand from the rear of the cushion carrier -2- -Arrows B-  .
    9. Fig 7: Loosening Cover For Rear Backrest
    G09830013Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  9. Fold cover piping -1-  at the sides right and left in direction of arrow.
    Fig 8: Folding Cover Piping
    G09830014Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  10. Press plastic strip -2-  on cover for backrest -1-  out of the fixing clips -3-  .
    Fig 9: Installing Cover For Backrest
    G09830015Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  11. Remove cover for backrest -1-  .
    Fig 10: Removing Cover For Backrest
    G09830016Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals