Installing Padding For Front Middle Backrest
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Position cover -3-
on the front of the padding -2-
.
- Align Velcro strip -1-
on the cover with the Velcro fastener on the padding -2-
and secure it -arrows-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Fold cover -3-
over all the way around and straighten it (Fig 2).
- Press on Velcro fasteners -1-
on the back of the padding -2-
(Fig 2).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.