Removing Padding For Front Middle Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cover For Front Middle Backrest Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disengage cover for middle backrest -1- out of the plastic frame -2- all the way round.

Fig 2: Disengaging Cover For Middle Backrest
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Cut through cushion clips -1- using side cutters. Detach piping -2- for cover for middle backrest and remove plastic frame -3- from the padding -4- .

Fig 3: Removing Cover For Middle Backrest
Courtesy of PORSCHE CARS NORTH AMERICA, INC.