LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (74 - Seat UPHOLSTERIES, Cover -- CARRERA (997)) >> WM 741819 Removing And Installing Padding For Front Middle Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0) >> Installing Padding For Front Middle Backrest

Installing Padding For Front Middle Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position piping -2-  for cover for middle backrest and padding -4-  on the plastic frame -3-  . Use the cushion clip pliers Nr.130  and the cushion clips -1-  to connect the cover strips and the plastic frame -3-  .
    Fig 1: Installing Cover For Middle Backrest
    G09829988Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Engage cover for middle backrest -1-  in the plastic frame -2-  all the way round.
    Fig 2: Engaging Cover For Middle Backrest
    G09829989Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals