LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (74 - Seat UPHOLSTERIES, Cover -- CARRERA (997)) >> WM 741819 Removing And Installing Padding For Front Middle Backrest (Air-Conditioned Comfort Seat) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0) >> Removing Padding For Front Middle Backrest

Removing Padding For Front Middle Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Cover For Front Middle Backrest Position
G09829990Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Disengage cover -1-  from the plastic frame -2-  all the way around -arrows-  .
    Fig 2: Disengaging Cover
    G09829991Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Release and disengage cushion clips -1-  using a screwdriver -arrow A-  .
  3. Remove plastic frame -2-  from the cover -3-  and remove padding -4-  (-arrow B-  ).
    4. Fig 3: Removing Padding
    G09829992Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals