LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (74 - Seat UPHOLSTERIES, Cover -- CARRERA (997)) >> WM 741819 Removing And Installing Padding For Front Middle Backrest (Air-Conditioned Comfort Seat) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0) >> Installing Padding For Front Middle Backrest

Installing Padding For Front Middle Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check cushion clips -1-  and engage them in the integrated metal strut -2-  for the cover -3-  if necessary.
    Fig 1: Fitting Cushion Clips
    G09829993Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Fit cover -3-  and padding -4-  and align with the contour of the plastic frame -2-  (-arrow A-  ).
    Fig 2: Installing Padding
    G09829994Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Press cushion clips -1-  through the cut-out in the padding -4-  and into the plastic frame -2-  (-arrow B-  ) until they engage securely.
  4. Engage cover -1-  in the plastic frame -2-  all the way around -arrows-  .
    Fig 3: Engaging Cover
    G09829995Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals