Installing Padding For Front Backrest: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Padding For Front Backrest Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Sealing surface of backrest frame must be clean and free of grease.

Apply adhesive -1- to the marked area of the padding -2- .

Fig 2: Applying Adhesive
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Place padding -1- on the cushion carrier -2- and align it with the cushion carrier.

Fig 3: Installing Padding
Courtesy of PORSCHE CARS NORTH AMERICA, INC.