LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (74 - Seat UPHOLSTERIES, Cover -- CARRERA (997)) >> WM 741619 Removing And Installing Suction Fan For Backrest Surface (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing Suction Fan For Backrest Surface

Removing Suction Fan For Backrest Surface

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Suction Fan For Backrest Surface Position
G09829950Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Turn suction fan for backrest surface clockwise -arrow A-  until the suction fan for the backrest surface is released. Counter at the air duct -B-  while doing this.
  2. Remove suction fan for backrest surface from the air duct -arrow B-  .↓
    Fig 2: Removing Suction Fan For Backrest Surface
    G09829951Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals