Installing Suction Fan For Backrest Surface

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Check rubber mounting -1- for damage and replace it if necessary.

Fig 1: Identifying Rubber Mounting On Suction Fan For Seat Ventilation
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Ensure that the suction fan is installed at the correct position!
Insert suction fan for backrest surface into the air duct -arrow A- , press it in and turn anti-clockwise until the suction fan for the backrest surface is fully locked in the air duct.

Fig 2: Installing Suction Fan For Backrest Surface
Courtesy of PORSCHE CARS NORTH AMERICA, INC.