LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (74 - Seat UPHOLSTERIES, Cover -- CARRERA (997)) >> WM 741319 Removing And Installing Cover For Front Seat (Folding Sports Bucket Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove sports bucket seat. → REMOVING BUCKET SEAT
  2. Fit sports bucket seat on assembly fixture. → 7201IN MOUNTING FRONT SEAT ON ASSEMBLY FIXTURE

    Information 

    Only for cover for side of seat.

  3. Remove bottom belt strap guide at the left and right. → REMOVING BELT STRAP GUIDE
scientia non olet · About LEMON Manuals