Removing Cover For Front Seat

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cover For Front Seat Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Press cover piping at rear carefully out of the seat frame using a screwdriver -arrows- .

Fig 2: Pressing Out Cover At Rear
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Slightly loosen cover piping -1- with a screwdriver and pull out all around by hand.

Fig 3: Pulling Out Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unclip fixing clips -1- with a screwdriver.

Fig 4: Removing Fixing Clips
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Cut open cushion clips -1- with side cutters and remove cover -2- from padding.

Fig 5: Loosening Cover From Padding
Courtesy of PORSCHE CARS NORTH AMERICA, INC.