Care Instructions For Water Stains And Damp Stops On Seats With Seat Ventilation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Rain water or dampness can cause spots to appear on the perforated leather.
Removing water stains and damp stops
Requirements:
- Seat heating and seat ventilation must be switched off.
- Avoid direct sunlight.
- Do not remove water stains or damp stops using leather cleaner or care products.
- Wipe off the complete seat surface and backrest surface using a clean, fine-pore sponge with distilled water.
Make sure that the water does not soak right through to the back of the perforated leather.
- Leave the seat cover to dry completely at room temperature and away form direct sunlight.
Do not switch on seat heating and seat ventilation.
- Once the seat cover is dry, rub it down with a dry, lint-free cloth.
- Wipe off the complete seat surface and backrest surface using a clean, fine-pore sponge with distilled water.