LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (90 - Instruments, Alarm System -- CARRERA (997)) >> WM 903519 Removing And Installing Gateway Control Unit (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS) >> Removing Gateway Control Unit

Removing Gateway Control Unit

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The gateway control unit is located underneath the plenum panel.

Fig 1: Identifying Gateway Control Unit Installation Position
G09830431Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Switch off ignition and remove ignition key.
  2. Unscrew the three fastening screws -1-  on the cover.
    Fig 2: Removing Cover Fastening Screws
    G09830432Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Turn the cover and control unit around.
  4. -A-  Pull (unclip) the gateway control unit out of the cover at the connector side.
    Fig 3: Removing Gateway Control Unit
    G09830433Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. -B-  Pull the gateway control unit to the left out of the holder.
  6. Release electric connector -A-  and pull it off the gateway control unit.
    Fig 4: Removing Electric Connector
    G09830434Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals