LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (90 - Instruments, Alarm System -- CARRERA (997)) >> WM 902519 Removing And Installing Instrument Cluster (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS) >> Installing Instrument Cluster

Installing Instrument Cluster

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the instrument cluster, connect the electrical plug and lock.
    Fig 1: Installing Instrument Cluster
    G09830428Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. The instrument cluster has two retaining clips; push instrument cluster into the dashboard and press on until the retaining clips engage.
  3. Screw down instrument cluster with both fastening screws -1-  . → 4.2x16-C: 2.3 Nm (2.0 ftlb.) 
    Fig 2: Installing Fastening Screws
    G09830429Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. If a new instrument cluster was installed, → Programming The Instrument Cluster 
scientia non olet · About LEMON Manuals