LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (90 - Instruments, Alarm System -- CARRERA (997)) >> WM 900319 Removing And Installing Dashboard Insert (Applies To All Models Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO And Gt3 RS 4.0) >> Installing Dashboard Inset

Installing Dashboard Inset

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the dashboard insert in the dashboard mounting and use the fastening screws -1-  → 4, 2X13-C: 1 ftlb  and -2-  → 4, 2X13-C: 1 ftlb  to screw it firmly into place.
    2. Fig 1: Installing Dashboard Insert
    G09635433Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Clip in both the end caps for the ornamental strip.
scientia non olet · About LEMON Manuals