LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (60 - Sliding Roof, Tilting Roof -- CARRERA (997)) >> WM 602819 Removing And Installing Frame For Sliding Roof (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
M6x30 fastening screw for securing sliding roof frame at front to body   Tightening torque 9.7 Nm (7 ftlb.)    
M6x16 fastening screw for securing sliding roof frame at sides to body   Tightening torque 9.7 Nm (7 ftlb.)    
scientia non olet · About LEMON Manuals