Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Cover for rear sliding roof to rear window cover | Gap dimension A | 15 mm | +/-2 mm | ||
| Rear center panel to rear window cover | Gap dimension A | 6 mm | +/-1 mm | ||
| Rear center panel to rear window cover | Gap dimension B | 2 mm | +/-1 mm | ||
| Fastening screws securing rear window cover to hinge | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Fastening nuts securing sheetmetal bracket to hinge | Tightening torque | 4 Nm (3.0 ftlb.) | |||
| Handle strip of rear window cover to rear center panel | Rear window cover only lowered (max. 3 mm) | Gap dimension | 6 mm | +/-1 mm |