Removing Rear Window

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

When cutting out the rear window, take care not to damage the rivet connections that are connecting the hardtop body parts.
When cutting out the rear window, make sure to cut close to the rear window.

Fit a cutter -C- with a u-type cutter -E- . Set the vibration frequency controller to 5. Cut through the bond between the body and the rear window at the top, bottom and sides. → WM 6400IN GENERAL INFORMATION ON INSTALLING AND REMOVING CAR WINDOWS

Fig 1: Removing Rear Window
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Taking off rear window