Removing Adhesive From The Rear Window

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

Only if the rear window is to be re-installed.

Information

The remaining adhesive helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning solution.

Equip cutter -C- with flashing knife -D- and remove remaining adhesive from the rear window, ensuring that a surface coating of adhesive remains.

Fig 1: Removing Adhesive From Rear Window
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Only if the rear window is to be re-installed.

Information

The remaining adhesive helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning solution.

Equip cutter -C- with flashing knife -D- and remove remaining adhesive from the rear window, ensuring that a surface coating of adhesive remains.

Fig 1: Removing Adhesive From Rear Window
Courtesy of PORSCHE CARS NORTH AMERICA, INC.