Preparing 2-Component Adhesive For Processing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The adhesive has an open time of -15 min- , which means that the bonding material must be applied and the car window must be assembled within this period of time.
- In order to ensure that the substance is completely mixed, apply a 30 mm long adhesive bead of fresh adhesive to a piece of cardboard before processing.
- Preparing 2-component adhesive for processing. → Processing of Porsche 2-component window bonding agents
Information
- The adhesive has an open time of -15 min- , which means that the bonding material must be applied and the car window must be assembled within this period of time.
- In order to ensure that the substance is completely mixed, apply a 30 mm long adhesive bead of fresh adhesive to a piece of cardboard before processing .
- Preparing 2-component adhesive for processing. → Processing of Porsche 2-component window bonding agents