LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (64 - Glazing, Window Control -- CARRERA (997)) >> WM 647119 Removing And Installing Rear Window Lifter (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear side trim panel.→ INSTALLING REAR SIDE TRIM PANEL 
  2. End service position.→ 6101IN IN -CONVERTIBLE TOP SERVICE POSITION

    Information 

    Only for vehicles with hardtop.

  3. Install hardtop. → INSTALLING HARDTOP

    Information 

    Only for vehicles with hardtop.

  4. Adjust the hardtop. → 610215 ADJUSTING HARDTOP
scientia non olet · About LEMON Manuals