LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (64 - Glazing, Window Control -- CARRERA (997)) >> WM 645819 Removing And Installing Switch For Power Windows (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing Switch For Power Windows

Removing Switch For Power Windows

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Switch For Power Windows
G09826607Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Release -arrow a-  and pull off connector.
    Fig 2: Pulling Connector Off Switch For Power Windows
    G09826608Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Lever off switch for power windows at the locking tab -arrow-  (-arrow A-  ) and remove it.
    Fig 3: Removing Switch For Power Windows
    G09826609Courtesy of PORSCHE CARS NORTH AMERICA, INC.