Adjusting The Lower Stop Of The Power Window Unit

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Position Of Front Power Windows

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

When replacing the power window unit, make sure that the correct position of the lower limit stop is selected for the respective model.
There are three bores lying one above the other with the screwed-on limit stop in the front power window unit rail.
The limit stop must be fitted in the bottom bore for the 997 model.

Fig 2: Identifying Limit Stop Adjustment
Courtesy of PORSCHE CARS NORTH AMERICA, INC.